Creation date 21.07.2001
Chapter of:
Author(s): hpbaby
Navigator: previous main next
Version:     EN

Best in:1024*768

THE HIGH RELIZATIONS  

Aim:

Make the hp48 spell letters from a text by the use of a vocal synthetizer.

Schematic:

hptalk-schematics.png (79726 bytes) The vocal sunthetizer ISD1020 is a chipwher 20 seconds of voice,sounds can be stored. (ID2590 = 90 seconds)through an electret a microphone (M). It costs about 100F for  the ISD1020 et 150F for the 'ISD2590.

The choice between recording cycle (I opened) eand playing   (I closed) is made by the switch I. I have recorded the alphabet letters in the 20 seconds available. (this is stored inside flash memory banks) 

The difficulty is to map correctly the memory to fit all the letters and to keep as possible undertandable. I have linked this board to
hp48 as I need to set the starting adress of recording for each letter. If I change the adress on the digital 8 bit bus, the play is automatically triggered tanks to the monostable flip flop made by IC4.

The mapping of letters inside the isd1020 should hereby match with the adress given by the hp48 to spell letters. I get the sound of each letter of the text one after the other, on a 8 ohm speaker.
It requires a V=+5V power supply.

 

Realization

hptalk_board.jpg (41329 bytes) hptalk_typon.jpg (50070 bytes)

On the red wire is connected (not shown) the speaker.On the left side of the board , you can notice two plots : it give the availabilty to choose
by a jump the record or play mode.The tiny press button is used to start recording or playing sounds.

Lab48 :
Scope for HP and
signal generator +5/-5V 
with 8 logical Inputs/Outputs
Hpmodem :
To dial by an radio link between
2 HP - externals power supply are required
Hptalk :
How to spell alphabet letters with the HP by the use a vocal digitalizer from ISD
HpDomotic(en cours d'étude): Transformer sa HP en centrale domotique évoluée et économique à l'aide d'un pic16c84 en utilisant:
1) la liaision IR de la HP
2) La liaison série de la HP
pour:
Controller son  PC par voie série.
Controller sa TV, Magnétoscope et décoder les trames des télec.
ou bien d'autres :-)